Skip Maine state header navigation

Agencies | Online Services | Help
   
Planning Processes & Programs
Planning Documents
Major Planning Studies
  Public Involvement
  Passenger
Transportation Planning
  Freight Transportation Planning
Transportation Research
Safety Programs
  Traffic Counts
  Over length Truck
Routes
  Metropolitan Planning Organizations
  Home
 
 

Qualified Products List of

Evaporation Retardants

Monomolecular Film

Trade Name

Manufacturer
Application

CERTI-VEX ENVIO ASSIST

0 grams/liter V.O.C.

VEXCON CHEMICALS

7240 State Rd.

Philadelphia, PA 19135

Normal surface evaporation: one part CERT-VEX ENVIOASSIST to nine parts potable water.

Application rate: 200 ft2 /gal

CONFILM

10 grams/liter V.O.C.

ChemRex

889 Valley Park Drive

Shakopee, MN 55379

Normal surface evaporation : one part CONFILM to nine parts potable water.

Application rate: 200 to 400 ft2/gal

SikaFilm

Sika Corporation

201 Polito Ave

Lyndhust, NJ   07071

When diluted at a ratio of one to eight, one gallon will yield nine gallons of sprayable material which will cover an area of approximately 1600-3200 ft2.

SURE FILM

16 grams/liter V.O.C.

(concentrate)

DAYTON SUPERIOR

Chemical & Cement Products

30 Manning Road

Billerica, MA 01821

Normal surface evaporation: one part SURE FILM to nine parts potable water.

Application rate: 200 to 400 ft2/gal

EVAPRE

0 grams/liter V.O.C.

W.R. Meadows, Inc.

P.O. Box 338

Hampshire, IL 60140-0338

1 gallon of EVAPRE mixed with 9 gallons of water will cover 2,000 - 4,000 square feet

VaporAid

0 grams/liter V.O.C.

Kaufman Products, Inc.

3811 Curtis Ave.

Baltmore, MD 21226-1131

Stir well before and after diluting. Dilute 1 part VaporAid with 9 parts water. Coverage Rate: 200-400 ft2/gallon after dilution.

Surfaces of all concrete placements containing silica fume additive shall be coated with an approved evaporation retardent immediately after finishing and texturing of the concrete surface. Please consult the manufacturer for the proper application rate, desired equipment, and the mixing and application procedures. Successive applications or heavier applications of these products shall be applied as necessary to retain the required surface "wetness" appearance (502.15 Curing Concrete, Maine DOT Standard Specifications, December 2002).

Sales Representatives seeking approval of a new product should submit their product's Materials Technical Data Sheet, Instructions for Installation, Material Safety Data Sheet, and a completed copy of the MaineDOT Preliminary Information for Product Evaluation Form.

 

Last updated: June 12, 2007