Qualified Products List of

Concrete Curing Compounds

(liquid membrane forming)

TYPE 1-D, CLEAR OR TRANSLUCENT WITH FUGITIVE DYE
Manufacturer/Supplier	Product Name	Dry Time	Flash Point (F)	V.O.C. (g/l)	Last NTPEP Report
DAYTON SUPERIOR 7130 Ambassador Drive Allentown, Pennsylvania 18106 (610) 366-3890	D.S.S.C.C. CLEAR RESIN CURE WITH DYE
A.H. HARRIS & SONS, INC. 22 Leighton Rd. Augusta, Maine 04332 (800) 872-0821	HARRIS KONKURE CLEAR EMULSION
THE EUCLID CHEMICAL CO. 19218 Redwood Rd. Cleveland, OH 44110 (800) 321-7628	KUREZ DR VOX
TYPE 2, WHITE PIGMENTED
Manufacturer/Supplier	Product Name	Dry Time	Flash Point (F)	V.O.C. (g/l)	Last NTPEP Report
VEXCON CHEMICALS, INC./ A. H. Harris & Sons, Inc. 22 Leighton Rd. Augusta, Maine 04332 (800) 872-0821	CERTI-VEX ENVIO® CURE WHITE 500	60 min.	>200	179	14006.1 (2009)
DAYTON SUPERIOR 7130 Ambassador Drive Allentown, Pennsylvania 18106 (610) 366-3890	D.S.S.C.C. WHITE WAX CURE	2 hr.	>212	<350	14002.1 (2005)
	D.S.S.C.C. WHITE RESIN CURE
THE EUCLID CHEMICAL CO. 19218 Redwood Rd. Cleveland, OH 44110 (800) 321-7628	KUREZ VOX WHITE PIGMENTED
KAUFMAN PRODUCTS, INC. 3811 Curtis Ave. Baltimore, MD 21226-8600 (800) 637-6372	Thinflim 445 Wax Base	2-3/4 hr.	>212	<350	14002.1 (2005)

All products meet Maine Department of Environmental Protection Chapter 151: Architectural and Industrial Maintenance (AIM) Coatings VOC content limit for concrete curing compounds (max. 350 grams/liter).

Reference: MaineDOT Specifications (2002), Sections: 502 – Structural Concrete, 701 – Structural Concrete Related Material

Please see Concrete Curing Compounds Prequalification Criteria

* Type 1-D, Curing compound requires the addition of a fugitive dye which must be readily distinguishable for at least 4 hours and inconspicuous in 7 days.

Contact Doug Gayne, Safety, Training, & Research Office (207-624-3268) with any questions.

PLEASE NOTE: Products often times may have multiple uses. Products appearing on this particular list are expressly pre-qualified for this category of usage only. Do not use these products for any other application unless this product is noted on other lists.

Sales Representatives seeking approval of a new product should submit their product's Materials Technical Data Sheet, Instructions for Installation, Material Safety Data Sheet, and a completed copy of the MaineDOT Preliminary Information for Product Evaluation Form.

Page last updated: October 20, 2009