Protecto Wrap - M140A (R) & M400A (R)

Protecto Company

2255 South Delaware Street

Denver, CO 80223

Description of System - M140A (R) & M400A (R) Bridge deck waterproofing membranes are manufactured from a blend of SBS modified rubberized asphalt internally reinforced with a strong non-woven polypropylene fabric. M140A (R) is 60 mils thick and M400A (R) is 70 mils thick. The membrane system shall include the use of Protecto Wrap No. 80 Primer and Protecto Wrap 160-H Mastic.

Laydown temp - minimum 275°F

Royston Bridge Membrane No. 10AN Easy Pave

Royston Laboratories Division Chase Corp.

128 First St.

Pittsburgh , PA 15238

Description of System - Royston Bridge Membrane No. 10AN Easy Pave is a prefabricated reinforced laminate consisting of an impregnated fiberglass, non-woven, high strength inner mat sandwiched between layers of a polymer modified bitumen.

Temp: The hot asphalt overlay should be between 290 and 340 degrees F at the time of application.

Sealtight Mel-Dek Waterproofing Membrane

W.R. Meadows of PA

2100 Monroe Street

P.O. Box 2284

York, PA 17404

800.342.5976

Local Distributor: A.H. Harris & Sons, Inc., Call: 207.775.5764

Description of System - Sealtight Mel-Dek is a roll-type waterproofing membrane composed of a nominally 53 mil thick layer of polymeric waterproofing on a shrink-resist, heavy-duty 12 mil thick, polypropylene woven carrier fabric. The two components are laminated together.

Temp: The asphalt should be at least 290 degrees F at the time of compaction . The compacted asphalt overlay should have a minimum thickness of 2 inches.

CIM 1000 Waterproofing System

CIM Industries, Inc.

Peterborough, NH   03458

Local Distributor: Quinn Brown Associates, Inc. , 25 Green St. Norway, Maine 04268, 207.743.8885

System form continuous elastomeric barriers to water and most chemical solutions. Two liquid components are mixed on the job site just prior to cold application by squeegee, roller or spray and liquid cures quickly to form a seamless asphalt-extended polyurethane membrane. CIM 1000 is unaffected by the wood preservative known as pentaclorophenol.

CIM 1000  is the only product listed above which is approved for use on timber deck applications.

S

P

R

A

Y

A

P

P

L

I

E

D

Eliminator

Stirling Lloyd Products, Inc.

152 Rockwell Road

Newington, CT 06111

Tel. 860-666-5008

Fax 860-666-5106

Description: Rapid-curing, cold liquid spray applied MMA resin material, flexible, chemical-resistant, seamless.

Temperature: can be applied at ambient temperatures between 23 and 86 degrees Fahrenheit. Other factors such as relative humidity levels may also need to be taken into account. Various grades adapted to extreme application environments are available.

T

O

R

C

H

A

P

P

L

I

E

D

Sopralene Flam Antirock

Soprema Roofing and Waterproofing Inc.

Distributed by:

Special Projects Group, Inc.

25 Green Street

Norway, Maine 04268

Tel. 207-743-8885

Description- Waterproofing membrane made up of a non-woven polyester reinforcement and elastomeric bitumen (SBS modified bitumen). The top face is covered with colored granular, the under face is covered with a thermofusible plastic film. Sopralene Flam Antirock is torch applied.

Temp: The hot asphalt overlay should be between 290 and 320 degrees F at the time of application.

Armour Bridge Membrane Waterproofing

IKO

850 West Front Street

Sumas, WA 98295

514.633.9794

Local Distributor: Venture Construction, 6 Sharon Drive, Bow, NH 03304 514.633.9794 

Description: Non-woven polyester reinforcing mat that is coated and impregnated with modiflex SBS modified bitumen to a thickness of approximately 4.5 mm (177mils).

Temp: The hot asphalt overlay should be between 290 and 320 degrees F at the time of application.